Owner`s manual

PARTS PROVIDED
Locate the parts packed with the hood.
Duct Transition
with Damper
Heat Lamp
(2 with 48" models)
Allen Wrench
For Implement Rods
2 Stainless Steel Grease Filters
(3filters with/48" models)
0000
2 Implement Rods and/4 Stand-offs
Wood Support
with Original Screws
2 Grease Filter Trags
(3 supports with 48" models.)
HARDWARE
PACKAG E
Locate and check con-
tents. Screws shown
actual size.
2 (3/16") hollow wall an-
chors with screws to secure
hood to the wall at the
bottom
/4Phillips head screws to
secure the transition to
the hood outlet on the top
(E) (E)
2 flat washers
for wall anchors
Z7
J
!
4 screws to secure the
wood support to the wall
POZtDRIV 3
6 Phillips head screws to _ @
secure hood to the wood
support: (2 secured to
wood support)
! safetg screw and lock
washer, to secure the
blower: (screw is marked
with red or blue paint)
10 49 80151 8