Owner`s manual

Installation instructions
STEP 7 INSTALL FILTERS
, Place filter drip troys into the reor of the hood.
, Insert the grease filter into the opening (]nd drop into
the tr(]gs.
,To remove the filters, grosp the handle, push the filter
up and lift out.
ISTEP 8] INSTALL IMPLEMENT
RODS
_rew "_"A_ i
Stond-offs _ \!
// Into '!_
0
UseAllen
Wrenchto /
SecureRod //
to Stond-o_
, Use (_fiat blade screwdriver to install stc]nd-offs into the
bottom of the hood.
, Align implement rod to stc]nd-offs with the screw hole
towards the inside of the hood. Secure the rod to the
stc]nd-offs with the supplied Allen wrench.
, Follow the same procedure on the opposite side.
FINALIZE INSTALLATION
, Install the supplied infrared bulb(s).
, Seethe Owner's ivlc]nu(]lfor instructions to test opera-
tion.