Spec Sheet

ZV800SJ/BJMONOGRAM 36" SLIDE-OUT HOOD
Listed by
Underwriters
Laboratories
Product Specification Revised 1/18
WALL MOUNT INSTALLATIONS
These hoods may be installed onto a wall or below
a wall cabinet.
• Telescopic duct covers are provided to conceal the
ductwork, running to the ceiling.
• This hood can be installed for recirculation operation.
No kits required.
INSTALLATION BELOW A WALL CABINET
Order a cabinet that is at least 20" high from the
bottom frame to the inside top. The cabinet must be
at least 12" deep.
• The hood installation height is determined by
the ceiling height.
• The hood installation height must be 24" Min. above the
cooking surface.
36” Min.
24” Min.
30” Max.
24” Min.
*20” Min.
The vent hood must be installed 24" min. and 30" max.
above the cooking surface. The hood installation height,
from the cooking surface to the bottom of the hood,
depends upon ceiling height.
INSTALLATION BELOW A CABINET
* The cabinet must measure at least 20" from the bottom
frame to the inside top. The hood housing will occupy
the interior cabinet space.