Specifications

ZV830SMSSMONOGRAM 30" WALL-MOUNTED VENT HOOD
Listed by
Underwriters
Laboratories
Product Specification Revised 2/18
*Height
to
Ceiling
29-7/8
5-7/8
13-1/4
10-7/8
18-7/8
*The Supplied Duct Cover Fits 8' to 10' Ceiling Heights.
THIS VENT HOOD IS DESIGNED TO BE INSTALLED ON
A WALL AND VENTED TO THE OUTDOORS, OR IT CAN
BE INSTALLED FOR RECIRCULATING OPERATION. ALL
NECESSARY PARTS FOR RECIRCULATING OPERATION
ARE SUPPLIED WITH THE HOOD. NO KITS REQUIRED.
MUST USE AN 8" ROUND DUCT, NOT SUPPLIED WITH
PRODUCT.
A decorative duct cover is provided to enclose the
duct from the top of the hood to a 8' to 10' ceiling.
ACCESSORIES
An optional stainless steel duct cover is available for
12' ceiling heights. Order ZX83012 optional duct cover
at the same time as the vent hood and have on site
before installation.
DIMENSIONS AND CLEARANCES
The vent hood should be installed 24" min. and 30" max.
above the cooking surface. The cooking surface should
be at least 36" above the floor. Installation will be easier
if the vent hood is installed before the range or cooktop/
countertop is installed.
This hood can be installed over a Monogram electric or gas
cooktop.
INSTALLATION INFORMATION
Before installing, consult installation instructions packed
with product or available on monogram.com for current
dimensional data.
24” Min.
30” Max.
DIMENSIONS AND INSTALLATION INFORMATION
(IN INCHES)