Quick Specs

ZV900SLSSMONOGRAM 36" GLASS CANOPY WALL-MOUNTED HOOD
Listed by
Underwriters
Laboratories
Product Specification Revised 4/17
*Height
to
Ceiling
20-7/16"
3-1/4"
35-7/8"
THIS VENT HOOD MAY BE INSTALLED ONTO A WALL
AND VENTED TO THE OUTDOORS, OR IT CAN BE
INSTALLED FOR RECIRCULATING OPERATION. ALL
NECESSARY PARTS FOR RECIRCULATING OPERATION
ARE SUPPLIED WITH THE HOOD. NO KITS REQUIRED.
MUST USE AN 8" ROUND DUCT.
A decorative duct cover is provided to cover the duct
from the top of the hood to a 7'11" to 9'5" ceiling.
ACCESSORIES
An optional stainless steel duct cover is available for 9'6"
to 10'5" ceiling heights. Order ZX90010 optional duct
cover at the same time as the vent hood and have on site
before installation.
DIMENSIONS AND CLEARANCES
The vent hood should be installed 24" min. and 30" max.
above the cooking surface. The cooking surface should
be at least 36" above the floor. Installation will be easier
if the vent hood is installed before the range or cooktop/
countertop is installed.
This hood can be installed over a Monogram electric or
gas cooktop. It cannot be installed over a Monogram
professional cooktop or range.
INSTALLATION INFORMATION
Before installing, consult installation instructions packed
with product or available on monogram.com for current
dimensional data.
NOTE
Installation height should be measured from the
cooking surface to the outer glass sides.
* The supplied duct cover fits
8 ft. to 9’5" ceiling heights.
Order ZX90010 for 9'6" to
10'5" ceiling heights.
24" min.
30" max.
36" min.
The vent hood must be installed 24" min. and
30" max. above the cooking surface depending
on the ceiling height.
DIMENSIONS AND INSTALLATION INFORMATION
(IN INCHES)