Installation Instructions

STEP 11 INSTALL LOWER DUCT COVER

• Place rear duct cover onto the hood.

• Place front duct cover onto the hood.

• Secure the duct covers with 6 screws.

Front bottom duct cover section

(snap into place and secure with

6 screws – 3 per side)

Plan diagram

top view

Front bottom duct

cover sections

STEP 12 INSTALL DUCT COVER TRIM

• Install side brackets to secure the lower duct

tightly against the upper duct.

• Hold lower trim strips (narrow pieces) with hooks

facing down. Place the hooks inside the slots and

slide downward.

• Select the correct size upper trim strips and press

into place.

Upper

trim

strip

Lower

trim strip

Lower

trim

strip

Upper

trim

strip

Side

bracket

INSTALLATION—VENTED TO THE OUTSIDE

STEP 13 INSTALL METAL FILTER

IMPORTANT: Check to be sure that the main

ON/OFF switch next to the motor is in the ON

position.

• Tip the filter into the left or right side of the

opening. Lift the filter to the opposite side and

into the filter lock.

• To remove the filter, pull the filter lock downward.

Filter lock

STEP 14 FINALIZE INSTALLATION

• Remove all tape and packing material.

• Refer to the Owner’s Manual for operating instructions.