Installation Instructions

21
Installation Instructions
INSTALLATION—RECIRCULATING
STEP 9 CONNECT CABLES
• Join the two cable connectors at the front of the
hood. Secure the cables behind the retainer clip.
Retainer
clip
STEP 8 MOUNT THE HOOD
ONTO THE SUPPORT
WARNING: Two people are
required to lift and position the hood onto
the support.
AVERTISSEMENT :Il faut
deux personnes pour lever et mettre en
place a hotte sur le support de montage.
• Lift the hood to the bottom
of the support, engaging
the keyhole slots to the 4
mounting screws.
• Tighten the
4 mounting screws.
• Install 6 additional screws as shown.
To lights
To control
panel
STEP 7 INSTALL HOOD ATTACHMENT
SCREWS
• Install 4 hood attachment screws in the bottom
of the support as shown. Leave 1/4″ gap between
screw head and support flange.
Install 4
attachment
screws
Install 6 screws