Specifications
21
Installation Instructions
STEP 7 INSTALL FILTERS
1. Remove protective film from the filters.
2. Tip the filter into the back tab slots and lift up.
While maintaining slight backward pressure
on filter, open clip and press into place with
two hands.
3. To remove, support filter with one hand while
pulling filter clip down with the other.
STEP 8 FINALIZE INSTALLATION
1. Check to be sure all tape and packaging
materials have been removed.
2. Refer to Owner’s Manual for operating
instructions.
Clip
Clip
NETSPACE
::
rangehoods
.
com
Call 1-800-667-8721 anywhere in the US and Canada
-
www.rangehoods.com
GE Monogram at ::rangehoods.com is a division of kitchen::accessories