Spec Sheet

For questions about your
appliance, please call 1-800-626-2000.
Product Specication Created 10/19
HELPFUL TIPS
PAGE 3 OF 3
ANTI-TIP BRACKET INSTALLATION
AIR GAP INSTALLATION DIMENSIONS
A
e refrigerator is top heavy and
must be secured to prevent the
possibility of tilting forward.
WARNING:
Wood Wall and Floor Construction:
• Drill the appropriate number of 1/8"
(3 mm) pilot holes in the center of
each floor bracket hole being used
(a nail or awl may be used if a drill
is not available) AND remove the
locator template from the floor.
• Mount the anti-tip floor bracket by
fastening the 2 , or recommended 4,
#10-16 hex-head screws tightly into
place as illustrated in figure 3.
Attachment to Wall and Floor
Rear RH
Corner of the
Refrigerator
2 Screws
Must Enter
Wood or
Metal Stud
Wall
Plate
Stud
Floor
Bracket
Wall
Floor
A
Each Side 1/8" (.3 cm)
Top 1" (2.5 cm)
Back 2" (5.1 cm)