Spec Sheet

NOTES
MONOGRAM 1.2 CU. FT. DRAWER MICROWAVE ZWL1126SJSS
Product Specification Revised 1/18
4"
(10.2)
5"
(12.7)
24 3/16" (61.4) min
24 1/2" (62.2) max
cutout width
16 7/16"
(41.8)
16 7/8"
(42.9)
min cutout
height
E
FLUSH INSET INSTALLATION
FRONT VIEW
FLUSH INSET INSTALLATION
TOP VIEW
TOP VIEW
22" (55.9) mounting
cleat opening width
FLUSH INSET INSTALLATION
SIDE VIEW
23 1/2"
(59.7) min depth
1 3/16"
(3.0)
Side cleat
3/4" Shelf
(1.9)
ZWL1126SJ
A
Junction box location
(May also be located
in adjacent cabinet.)
B
To reduce the risk of
tipping of the drawer,
the Anti-Tip block must
be properly installed
located 14-13/16" above
the floor on which the
Microwave Drawer will
sit. The Anti-Tip block
must be provided
and pre-installed by
the purchaser of the
product or builder
before install can be
done. The Anti-Tip
block prevents serious
injury that might result
from spilled hot liquids.
C
Cleats may be visible
and should be finished
to match cabinetry.
The face of the shelf
must sit 1-7/8" back
from the face of the
cabinet. See installation
instructions for further
details including the
installation of 24" flush
mount deflector vent.
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
D
4"
(10.2)
5"
(12.7)
22 1/8" (56.2) min
cutout width
18 1/2"
(47.0)
14 13/16"
(37.6)
cutout
height
E
STANDARD INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
SIDE VIEW
23 1/2"
(59.7) min depth
ZWL1126SJ
4"
(10.2)
5"
(12.7)
22 1/8" (56.2) min
cutout width
18 1/2"
(47.0)
14 13/16"
(37.6)
cutout
height
E
STANDARD INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
SIDE VIEW
23 1/2"
(59.7) min depth
ZWL1126SJ
STANDARD INSTALLATION
FLUSH INSTALLATION
A
B
A
B
C
D