Spec Sheet
HELPFUL TIPS
PAGE 3 OF 3 Product Specication Revised 8/20
For questions about your
appliance, please call 1-800-626-2000.
4"
(10.2)
5"
(12.7)
24 3/16" (61.4) min
24 1/2" (62.2) max
cutout width
16 7/16"
(41.8)
16 7/8"
(42.9)
min cutout
height
E
FLUSH INSET INSTALLATION
FRONT VIEW
FLUSH INSET INSTALLATION
TOP VIEW
TOP VIEW
22" (55.9) mounting
cleat opening width
FLUSH INSET INSTALLATION
SIDE VIEW
23 1/2"
(59.7) min depth
1 3/16"
(3.0)
Side cleat
3/4" Shelf
(1.9)
ZWL1126SJ
A
Junction box location (May
also be located in adjacent
cabinet.)
B
To reduce the risk of tipping
of the drawer, the Anti-Tip
block must be properly
installed located 14-13/16"
above the floor on which the
Microwave Drawer will sit.
e Anti-Tip block must be
provided and pre-installed
by the purchaser of the
product or builder before
install can be done. e Anti-
Tip block prevents serious
injury that might result from
spilled hot liquids.
C
Cleats may be visible and
should be finished to match
cabinetry.
D
e face of the shelf must
sit 1-7/8" back from the
face of the cabinet. See
installation instructions for
further details including
the installation of 24" flush
mount deflector vent.
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
4"
(10.2)
5"
(12.7)
22 1/8" (56.2) min
cutout width
18 1/2"
(47.0)
14 13/16"
(37.6)
cutout
height
E
STANDARD INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
SIDE VIEW
23 1/2"
(59.7) min depth
ZWL1126SJ
4"
(10.2)
5"
(12.7)
22 1/8" (56.2) min
cutout width
18 1/2"
(47.0)
14 13/16"
(37.6)
cutout
height
E
STANDARD INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
SIDE VIEW
23 1/2"
(59.7) min depth
ZWL1126SJ
STANDARD INSTALLATION
FLUSH INSTALLATION
A
B
A
B
C
D