Literature

2
Backguard kits – coil and gas ranges
❚ Contains reversible end caps, screws and installation instructions
for an easy custom built-in appearance.
End cap kit
❚ Used when installing slide-in range models into a countertop
that has been previously notched for front end caps. The
standard flush front end caps on the range can be replaced
with the notched end caps in the kit. The kit contains right
and left end caps and installation instructions.
Maintop rear filler strip kit
❚ The strip kit fills in the gap at the rear of the range for a more flush
custom appearance. Kit color should match color of range, not
color of cooktop.
Note: Gas sealed burner models JGSP44 and JGSP23 are shipped with a “vented” rear filler trim kit.
Slide-In and Drop-In Ranges
GE PROFILE
™
AND GE
®
RANGE ACCESSORIES
Installed with
counter backsplash
Note: Endcap overlaps
countertop backsplash.
30" Electric coil Slide-in and Drop-in
and gas Slide-in ranges
(Models: JSP34,
JSP26, JSS26, JSS16, JGSP44 and JGSP23)
JXS31–White
JXS32–Brushed-chrome
JXS33–Almond
JXS34–Black
JXS35–Bisque
27" Electric Drop-in ranges
(Models: JMP31, JMP28 and JMS08)
JX27RWH–White
JX27RBK–Black
Backguard kits – smooth-top ranges
❚ Designed for slide-in models when replacing a free-standing range,
this kit is used when the countertop is cut all the way to the wall.
30" Electric CleanDesign Slide-in and
Drop-in ranges
(Models: JS966/968, JSP56/57,
JSP46/47, JD966/968 and JDP46/47)
JXS39SS–Stainless steel
JXS36WW–White
JXS36CC–Bisque
JXS36BB–Black
30" Electric coil Slide-in and gas Slide-in ranges (Models: JSP34, JSP26, JSS26, JSS16,
JGSP44 and JGSP23)
JXS40–Chrome
30" Electric CleanDesign Slide-in and
Drop-in ranges
(Models: JS966/968,*
JSP56/57,* JSP46/47,* JD966/968 and JDP46/47)
JXS66WW–White***
JXS66CC–Bisque***
JXS66BB–Black***
30" Electric coil Slide-in and Drop-in
ranges**
(Models: JSP34, JSP26, JSS26, JSS16)
JXS62BB–Black
JXS63WW–White
JXS64AA–Almond
Installed without
counter backsplash
JXS65CC–Bisque
JXS28–Brushed-chrome
*Shipped with range.
**Kit contains three widths of filler strips, clips, screws and installation instructions.
***Not required if countertop is cut as specified in installation instructions.
Shown in free-standing
cutout without backguard
kit–note gap behind
cooktop
Range has been pulled away from countertop in photo to better illustrate end cap
installation.