Literature

3
30" Electric CleanDesign Slide-in ranges
(Models: JS966/968, JSP56/57 and JSP46/47)
JXS56WW–White
JXS56CC–Bisque
JXS56BB–Black
30" Electric coil Slide-in and gas
Slide-in ranges
(Models: JSP34, JSP26, JSS26,
JSS16, JGSP44 and JGSP23)
JXS52BB–Black
JXS53WW–White
JXS55CC–Bisque
30" Electric CleanDesign Slide-in ranges
(Models: JS966/968, JSP56/57 and JSP46/47)
JXS86WW–White
JXS86CC–Bisque
JXS86BB–Black
30" Electric coil slide-in and gas
Slide-in ranges
(Models: JSP34, JSP26, JSS26,
JSS16, JGSP44 and JGSP23)
Pub. No. 3-A040
30" Electric CleanDesign Slide-in ranges
(Models: JS966/968, JSP56/57 and JSP46/47)
JXS76WW–White
JXS76CC–Bisque
JXS76BB–Black
Lower trim kit – slide-in ranges
❚ Color-matched toekick is designed to be used when the range
needs to be raised to the highest position to accommodate thick
countertop material such as tile or granite. Kit also includes
extended leveling legs and instructions. Use kit when countertop
height is 36-1/2" to 38" high.
Lower trim kit – drop-in ranges (not shown)
❚ When a drop-in is installed in an existing cutout greater than
27-1/4" from the counter to the cabinet crossrail, a lower trim
kit should be used to fill the gap at the bottom of the range.
Kit dimensions 30" wide x 4" high.
Vertical side trim kit
❚ These side trim extensions are used to close the gaps between
a slide-in range and adjacent base cabinet (up to 3/16" each side).
Kit contains two side trim pieces and installation instructions.
Body side kit
❚ These side panels are used when one side of the slide-in range
is exposed. Kit contains one body side and installation instructions.
For free-standing application, two kits are needed. Total installed
range width would be 31-1/4" when two side panel kits are used.
After trim kit
Before trim kit
After trim kitBefore trim kit
30" Electric CleanDesign, Coil and Drop-in ranges
(Models: JD966/968, JDP46/47, JDP39, JDP36 and JDS26)
JXS96WW–White
JXS96CC–Bisque
JXS96BB–Black