M1000ANC Bluetooth® Headphones with ANC and Dirac® HD Sound P/N 43453 User's Manual
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. • This device is intended for indoor use only. Do not expose this device to water or moisture of any kind. • Do not expose this device to excessive vibration, extreme force, shock, or fluctuations in temperature or humidity.
state, or federal regulations for electronic waste. • Charge the battery before first use and at least once every three months to keep it fresh and capable of holding the full charge. • Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For stubborn deposits, moisten the cloth with warm water. • This device has no user serviceable parts. Do not attempt to open, service, or modify this device.
CUSTOMER SERVICE The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to none. If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com. Check the website for support times and links.
PRODUCT OVERVIEW 5
OPERATION Power On/Off • Press and hold the Power/Bluetooth Button for 2 seconds to turn the headphones on. The Power On/Off Light Indicator will illuminate solid white. • If it is not already paired, the headphones will enter Bluetooth® pairing mode when first powered on. • Press and hold the Power/Bluetooth Button for 2 seconds to turn the headphones off. The Power On/Off Light Indicator will blink red until power is off.
Bluetooth® Pairing 1. With the headphones powered off, press and hold the Power/Bluetooth Button for 5 seconds to enter Bluetooth® pairing mode. The Bluetooth Light Indicator will blink green, indicating that it is in Bluetooth® pairing mode. 2. Open the Bluetooth settings on your phone 3. Locate and select the MP43453 entry. If and search for nearby Bluetooth devices. prompted for a passcode, enter 0000 (four zeros).
Audio Playback • Double tap the right earcup to Play or Pause audio playback. • Swipe forward on the right earcup to skip forward to the next track. • Swipe backward on the right earcup to skip back to the previous track. • Swipe up on the right earcup to increase the volume level. • Swipe down on the right earcup to decrease the volume level.
someone talking or hear ambient environmental sounds. Conversation Mode While audio is playing, you can press and hold the right earcup to temporarily reduce the volume level, so you can hear someone talking or hear ambient environmental sounds.
Phone Calls • When an incoming call is received, double tap the right earcup to answer the call. • While a call is in progress, double tap the right earcup to hang up. • When an incoming call is received, press and hold the right earcup for 2 seconds to reject the call. • If another call is received while a call is in progress, double tap the right earcup to put the current call on hold and answer the incoming call.
• If another call is received while a call is in progress, press and hold the right earcup for 2 seconds to reject the incoming call. • With one call in progress and another on hold, press and hold the right earcup for 2 seconds to switch between calls. Voice Assistant and ANC • Press the Voice Assist Button to activate your phone's voice assistant. • Slide the ANC Mode Switch to the HI position to activate maximum noise cancelling, up to 35dB.
Charging 1. The Power On/Off Light Indicator blinks red when the battery is low, indicating that the battery should be recharged. 2. Plug one end of the included USB Charging Cable into the USB Type-C® port on the headphones, then plug the other end into a USB power source, such as a computer, wall charger, power bank, etc. (available separately). The Power On/Off Light Indicator will illuminate red and white to indicate that charging is in progress. 3.
Wired Connection If your device does not have Bluetooth® or you don't want to use Bluetooth, you can use a wired connection. To do so, plug one end of the included 3.5mm Audio Cable into the 3.5mm Input jack on the headphones, then plug the other end into the headphone output of your audio device. TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations.
into the search bar. If available, support files are linked at the bottom of the product page. SPECIFICATIONS P/N 43453 Driver Size 40mm Frequency Response 20Hz ~ 20kHz Bluetooth® Version 5 Bluetooth Frequency 2.402 ~ 2.
REGULATORY COMPLIANCE Notice for FCC FCC ID: 2ADDH-43453 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifying the equipment without Monoprice's authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices.
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Warning Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction.
UK Conformity with the relevant Union harmonization legislation This equipment complies with the essential requirements listed below: • Radio Equipment Regulations 2017 • Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 18
For Consumers in the European Union: The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electrical and electronics products via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health.
Monoprice™, Monolith™, the Monolith logo, and all Monoprice logos are trademarks of Monoprice Inc. The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. Dirac® is a registered trademark of Dirac Research AB. USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
