User Manual

5
6. Power LED: Illuminates red when power is applied.
7. HDBT Out: RJ45 jack for connecting the Cat6 cable to the Receiver.
8. RS232 Mode Switch: Switch for determining the behavior of the RS232 connection.
When in the Ctrl position, it serves as an RS232 serial extender. When in the Update
position, it allows you to update the Valens IC program by connecting to a PC and
running the batch file.
Receiver
1. HDMI Out: HDMI® port for connecting the video display.
2. IR In: 3.5mm jack for connecting an IR Receiver (not included).
3. IR Out: 3.5mm jack for connecting an IR Transmitter (not included).
4. RS232: Euroblock/Phoenix connector for connecting an RS232 data device.
5. DC 12V: DC barrel connector for connecting the included AC power adapter.
6. Power LED: Illuminates red when power is applied.
7. HDBT In: RJ45 jack for connecting the Cat6 cable to the Transmitter.
8. RS232 Mode Switch: Switch for determining the behavior of the RS232 connection.
When in the Ctrl position, it serves as an RS232 serial extender. When in the Update
position, it allows you to update the Valens IC program by connecting to a PC and
running the batch file.