User Manual

MONOPRICE
4-Port DisplayPort 1.2 to DisplayPort Multi-Stream Transport (MST) Hub
P/N 21970
Quick Start Guide
INTRODUCTION
This DisplayPort Multi-Stream Transport Hub allows you to distribute a single DisplayPort source to up to four
DisplayPort displays. You can mirror a single video stream to all displays or configure your PC to output
multiple video streams over the single DisplayPort output to increase your desktop area or to create a video
wall. It supports video resolutions up to 4K@60Hz for a single stream, which can be mirrored to up to four
displays, 4K@30Hz for two streams, and 1920x1080p@60Hz or 1920x1200@60Hz for three or four streams. It is
fully compliant with the DisplayPort 1.2 specification and is backwards compatible with all previous
specifications.
PACKAGE CONTENTS
 1x 1x4 DisplayPort to DisplayPort Multi-Stream Transport Hub
 1x AC Power Adapter
 1x Quick Start Guide
INSTALLATION
1. Ensure that all equipment to be connected is powered off and unplugged from its power source.
2. Using a DisplayPort 1.2 compatible cable, plug one end into the input on your display, then plug the
other end into one of the outputs on the hub. Repeat for up to three additional displays.
3. Plug the hub into the DisplayPort output of your computer or other source device.
4. Plug the included AC power adapter into the hub, then plug the adapter into a nearby AC power
outlet.
5. Plug in and power on all connected devices. Start video playback on your source device, then verify
that you can see the video on all connected displays.