User Manual

MONOPRICE
2-Port Mini DisplayPort 1.2 to DisplayPort Multi-Stream Transport (MST) Hub
P/N 21973
Quick Start Guide
INTRODUCTION
This Mini DisplayPort to DisplayPort Multi-Stream Transport Hub allows you to distribute a single
Mini DisplayPort source to two DisplayPort displays. You can mirror a single video stream to both
displays or configure your PC to output multiple video streams over the single Mini DisplayPort
output to increase your desktop area. It supports video resolutions up to 4K@60Hz for a single
stream, which can be mirrored to both displays, or 4K@30Hz for two streams. It is fully compliant
with the DisplayPort 1.2 specification and is backwards compatible with all previous specifications.
PACKAGE CONTENTS
 1x 1x2 Mini DisplayPort to DisplayPort Multi-Stream Transport Hub
 1x Quick Start Guide
INSTALLATION
1. Ensure that all equipment to be connected is powered off and unplugged from its power
source.
2. Using a DisplayPort 1.2 compatible cable, plug one end into the input on your display, then
plug the other end into one of the outputs on the hub. Repeat for the other display.
3. Plug the hub into the Mini DisplayPort output of your computer or other source device.
4. Plug in and power on all connected devices. Start video playback on your source device,
then verify that you can see the video on both displays.