User Manual

4
INSTALLATION
1. Ensure that all equipment to be
connected is powered off and unplugged
from its power source.
2. Using the two brackets, two U-bolts, and
four wingnuts, attach the antenna to a
pole or rail. Note that the antenna can be
mounted to a wall, but wall mounting
hardware is not included.
3. Screw the included coaxial cable onto the
coaxial connector on the antenna, then slide
the waterproof cap over the connection to
ensure that the connection is protected
from moisture.
4. Feed the coaxial cable into your home.
5. Use cable ties to secure the coaxial cable along its run.
6. Plug the other end of the coaxial cable into your television or set-top box.
Alternatively, plug the other end of the coaxial cable into the included external
amplifier, then plug the lead on the amplifier into your television or set-top box.
7. If using the external amplifier, plug the DC barrel connector on the included AC
power adapter into the amplifier, then plug the adapter into a nearby AC power
outlet.