User Manual

3
INTRODUCTION
Thank you for purchasing this Z-Wave Plus® RGB Smart Bulb! This RGB Smart Bulb is an AC
powered Z-Wave enabled device and is fully compatible with any Z-Wave enabled
network. Z-Wave is an interoperable, two-way RF mesh networking technology used for
home automation and security. Every AC powered Z-Wave device acts as a signal repeater,
so multiple devices result in more possible transmission routes, which helps eliminate RF
"dead spots" in the network. Any Z-Wave enabled device displaying the Z-Wave logo can
be used with Z-Wave devices from other manufacturers.
This RGB Smart Bulb can be turned on an off manually, using a standard wall switch, or
remotely, using a Z-Wave controller. The color and brightness can also be controlled using
the Android™ or iOS® app of an associated Z-Wave controller. It screws into a standard E26
light socket and, as an AC powered Z-Wave device, will act as a Z-Wave repeater.
FEATURES
 Supports remote control
 RGB LED can be set to any of over 16 million colors
 Color and brightness can be controlled using the Android™ or iOS® app of an
associated Z-Wave® controller
 Supports warm and cool white light
 Up to 600 lumens maximum brightness
 Supports 100 ~ 240 VAC, 50/60 Hz input power
 Acts as a Z-Wave repeater
 Supports Over-the-Air firmware updates