User Manual

7
ADVANCED CONFIGURATIONS
This RGB Smart Bulb supports several advanced configuration settings. The following
parameters can be accessed from your Z-Wave® controller's configuration interface.
Status Memory
Parameter #: 21
Default Setting: 0
Parameter Size: 1 byte
The RGB Smart Bulb can be set to remember and restore its on/off status after a power
outage.
0 = The RGB Smart Bulb remembers its on/off status when power is lost and will
restore the on/off status when power is restored (default).
1 = The RGB Smart Bulb will not remember its on/off status when power is lost. It
will be turned on when power is restored.
2 = The RGB Smart Bulb will not remember its on/off status when power is lost. It
will be turned off when power is restored.
Load Status Change Notification
Parameter #: 24
Default Setting: 1
Parameter Size: 1 byte
The RGB Smart Bulb can send notifications to an associated device (Group Lifeline)
whenever the power load changes.
0 = Notifications are disabled.
1 = The RGB Smart bulb sends a BASIC REPORT whenever the power load changes
(default).