MONOPRICE MP Bluetooth® Headphones with Qualcomm® aptX™ Support P/N 27722 User's Manual
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. Charge the battery before first use and at least once every three months to keep the battery fresh and capable of holding a full charge.
FEATURES Compatible with the Bluetooth® 4.1 + EDR specification Supports the Qualcomm® aptX™ audio codec Includes 3.5mm stereo audio jack for direct connections Can be paired to up to two devices Battery power status viewable on iOS® devices CUSTOMER SERVICE The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to none. If you have any problem with your order, please give us an opportunity to make it right.
PRODUCT OVERVIEW 1. Multifunction Button 5. Micro USB Port 2. LED Indicator 6. Microphone 3. Up Button 7. 3.5mm Audio Jack 4. Down Button OPERATION Power On: With the headphones powered off, press and hold the Multifunction Button (1) for 2 seconds. The headphones will power on and the LED Indicator (2) will flash blue 2 times. Power Off: With the headphones powered on, press and hold the Multifunction Button (1) for 3 seconds.
Increase Volume: Momentarily press the Up Button (3) to increase the volume one step. A "tick" sound can be heard when the maximum volume level is reached. Decrease Volume: Momentarily press the Down Button (4) to decrease the volume one step. A "tick" sound can be heard when the minimum volume level is reached. Play/Pause: Momentarily press the Multifunction Button (1) to start or pause playback. Next Track: Press and hold the Up Button (3) for 2 seconds to skip ahead to the next track.
LED STATUS Operation LED Status Power On LED flashes blue 2 times Power Off LED flashes red 2 times Pairing LED flashes red and blue alternately Standby LED flashes blue 3 times in 5 seconds Incoming Call LED flashes blue continuously Low Battery LED flashes red 2 times every 2 seconds Charging LED illuminates red while charging and changes to blue when charging is complete. PAIRING Perform the following steps to pair the headphones with a smartphone or tablet.
CHARGING To charge the headphone, plug one end of the included micro USB cable into the Micro USB Port (5) on the headphones, then plug the other end into a USB charger. Do not plug it into a computer, unless you want to reset your pairings. The LED Indicator (2) will illuminate red while charging is in progress and will change to blue when charging is complete.
SPECIFICATIONS Model 27722 Frequency Response 20Hz ~ 20kHz Sound Pressure Level 118dB ±3dB Impedance 32 ohms Bluetooth® Version 4.1 Support Bluetooth Profiles A2DP, AVRCP, HSP, HFP Wireless Range up to 32 feet (10 meters) Talk/Playback Time up to 14 hours on a full charge Standby Time up to 540 hours on a full charge Dimensions 7.9" x 7.1" x 2.6" (200 x 180 x 65 mm) Weight 9.0 oz. (256 g) The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc.
