Manualshelf

User Manual

ManualsBrandsMonoprice Manuals3D PrintersMP10 3D Printer - Black with (300 x 300 mm) Magnetic Heated Build Plate, Resume Printing Function, Assisted Leveling, and Touch Screen
11121314151617181920
12
12. Using the included plastic scraper, clean the extruded filament from the nozzle and
build platform.
It is normal for filament to ooze from the nozzle while the printer is
hot.
13. Touch the button on the Move Menu to return to the Main Menu.
14. Touch the Print button on the Main Menu. The printer will read the contents of the
memory card and display them on screen. Touch the cat.gcode file to start printing
the model. The sample print can take up to 3 hours to print.
15. After the first layer has been printed, touch the Pause or Cancel button to stop
printing.
16. Compare the first layer with the images in the table below to determine whether
the build platform needs to be leveled or not. If it does need adjustment, touch the
Cancel button on the Print Menu to stop the print. The Main Menu will appear.
Wrong
The nozzle is too far from the
platform. This can result in the
extruded material not sticking to the
build platform.