Wireless Smart MOTION SENSOR 33050 User’s Manual P/N
CONTENTS INTRODUCTION ................................................................................................................................................................................................ 3 FEATURES .............................................................................................................................................................................................................. 3 CUSTOMER SERVICE.............................................................
INTRODUCTION This Wireless Smart Motion Sensor allows you to remotely monitor your home using your Android™ or iOS® smartphone or tablet. The sensor communicates with your phone through your local Wi-Fi® network, so you won't need any separate mesh network hubs or controllers. Place sensors at entryways, garages, or basements to get notifications directly to your smartphone whenever there's motion or whenever someone is passing by.
PACKAGE CONTENTS Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement. 1x Motion Sensor 1x Mount Bracket 2x Screws 2x Screw Anchors 1x Adhesive Tape 1x User's Manual APPLICATIONS Attach the device on windows, doors, gates, garage doors, drawers, mailboxes, and even your refrigerator to be the first to know the statuses of your entryways.
PRODUCT OVERVIEW PHYSICAL INSTALLATION 1. The sensor can be powered using a USB connection or with batteries. If you will be using a USB power source, plug a micro USB cable (not included) into the micro USB port on the sensor, then plug the other end into a USB power source, such as a rechargeable battery or wall charger.
2. Determine the mounting location. The sensor should be placed indoors and away from water and other extreme weather conditions. Install the sensor's mount bracket in the desired location using the supplied screws and screw and anchors or the supplied adhesive tape. 3. Place the sensor onto the mount bracket, then slide it downward to secure it in place. Adjust the sensor so that it points to the desired location. APP INSTALLATION AND LOGIN 1.
2. Once it has been installed, launch the app. 3. If you have already used the STITCH app, tap the Login button, then enter your STITCH account information. If you have not installed and used the STITCH app before, proceed to app registration. You can register using your phone number or by using your email address. Follow the on-screen app instructions for more details. Note that the password must contain 6-20 characters and must include at least one number.
3. Scroll through the list and select Motion Sensor to add your new device to the STITCH app. 4. The LED indicator should be flashing blue rapidly, indicating that it is ready to be paired with your network. Tap Confirm on the app to continue, input the password to your wireless network, then tap Confirm again.
5. The app will start connecting to the device. Tap Done once it is completed. 6. If the LED is not flashing blue rapidly, open the cover and hold the Button for 5 seconds. The LED will flash blue rapidly, indicating the device has been successfully reset. AP Mode Installation AP mode differs from Smart Inclusion mode in that it does not use your Wi-Fi® network to manage the communications between your smartphone and the device.
2. Tap + on the Add Devices screen to add a new device. 3. Scroll through the list and select Motion Sensor to add your new device to the STITCH app.
4. Tap AP Mode at the top right. 5. The LED should be slowly blinking, indicating that it is ready to be added in AP mode. If it does begin blinking slowly, tap Confirm on the app to continue, input the password to your wireless network, then tap Confirm again.
6. In the wireless settings on your phone, select the Stitch-XXXX entry, then tap Connect Now to continue. The app will begin connecting to the device.
BUTTON INSTRUCTIONS In Network Press and hold the Button for 5 seconds, then release it to reset the sensor to the default settings and puts the sensor into Smart Inclusion mode Out of Network While in Smart Inclusion mode, press and hold the Button for 5 seconds, then release it to switch to AP mode Notes: In network: The sensor has been included into the network Out of network: The sensor is in its default status and has never configured into a Wi-Fi® network The duration of the configurati
SPECIFICATIONS Radio Frequency 2.4 ~ 2.484 GHz Supported Network Protocols IEEE802.11 b/g/n Power Source 6V 2x CR123A or 5V USB Battery Capacity 1300mAh Working Current 80mA Standby Current 40µA Detection Range 120° Sensitivity 8 Encryption Type WEP/TKIP/AES/WPS 802.11b: 17dBm @ 11Mbps Transmitting Power 802.11g: 15dBm @ 54Mbps Operating Temperature +14 ~ +113°F (-10 ~ +45°C) Storage Temperature -4 ~ +185°F (-20 ~ +85°C) Storage Humidity 8 ~ 80% RH Sensor Dimensions Approx. ø2.
REGULATORY COMPLIANCE Notice for FCC Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
Radio Notice for Industry Canada Caution This IC RSS-210 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device. This device complies with IC RSS-210.
TECHNOLOGY AT PRICES THAT MAKE SENSE www.monoprice.com Need Help? We’re here for you! Contact us: www.monoprice.com/contactus Product pictures are for reference only. Specifications described herein are subject to change without prior notification. All trademarks are the sole property of their respective companies. Stitch is a Sub-Brand for Smart Home of Monoprice. Copyright © 2018 Monoprice, Inc. All rights reserved.
