User Manual

13
BUTTON INSTRUCTIONS
In Network
Press and hold the Button for 5 seconds, then release it to reset the
sensor to the default settings and puts the sensor into Smart
Inclusion mode
Out of Network
While in Smart Inclusion mode, press and hold the Button for 5
seconds, then release it to switch to AP mode
Notes:
 In network: The sensor has been included into the network
 Out of network: The sensor is in its default status and has never configured into a
Wi-Fi® network
 The duration of the configuration network is about 2 minutes
LED INDICATOR STATUS
Smart Inclusion
LED Indicator flashes blue rapidly
AP Mode
LED Indicator flashes blue slowly
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
during regular business hours, 7 days a week. You can also get assistance through email by
sending a message to [e-mail]