User's Manual

set the network to active network model introdunced in section 5.1 , keep the equipment

online for a long time . In case the uart software in the original user on the server side can

real-time inspection to the existence of the uart equipment.

Reference setting (Take sensor as an example)

 Networking Setting

 IP address：192.168.2.X

 Mask：255.255.255.0

 Gateway：192.168.2.1

 DNS：192.168.2.1

 Operation mode setting

 Start Automatic operation mode

 Protocol Type：TCP

 C/S mode：server

 Port No.

60000

 Time Out：120