eSATA II 300 2-Port ExpressCard User Manual Ver. 2.00 All brand names and trademarks are properties of their Respective owners.
Features and Benefits z Fully compliant with ExpressCard Specification 1.0 z ExpressCard/34 Form Factor Module z Serial ATA generation 2 transfer rate of 3.
Hardware Description Hardware Installation General instructions for installing the card are provided below. Since the design of system may vary, refer to your system’s reference manual for further information, if needed. Insert the Card into the ExpressCard slot of your system. Make sure it is inserted all the way in for a solid connection.
Driver Installation For Windows® 2000 1. At the Found New Hardware Wizard, click Next. 2. Select Search for a suitable driver for my device (recommended), then click Next. 3. Please insert the CD driver bound with eSATA II 300 2-Port ExpressCard into your CD-ROM Drive, check CD-ROM drives, uncheck the other boxes, click Next, then click Next again. 4. If the Digital Signature Not Found message appears, click Yes. Our driver has been thoroughly tested for stability and compatibility. 5.
ExpressCard into your CD-ROM Drive, select Install the software automatically (Recommended), and click Next. 3. Accept the default entry, then click Next. 4. Click Finish. 5. Restart Windows to complete the installation. For Windows® Vista 1. At the Found New Hardware Wizard window pop-up, please select Locate and install drier software (recommended) to start the installation. 2. Please insert the CD driver bound with eSATA II 300 2-Port ExpressCard into your CD-ROM Drive. 3.
properties. A message this device is working properly is displayed in the dialog box, the driver has been correctly installed. Hot-Plugging Hard Disk Drives To remove a drive from a powered up system, do the following: 1. Right click My Computer and click Manage. 2. Select Device Manager. 3. Click Disk Drives, right click the target disk and select Disable/Enable. 4. Aug/07 You can now remove the target disk.
