MS
NOTE: Read entire instruction sheet before you start installtion and assembly. Component Checklist IMPORTANT: Ensure you have received all parts against the component checklist prior to installing. If any parts are missing or faulty, telephone the special franchiser for a placement. WARNING • Do not begin to installation of the product on you have read and understand the instructions and warnings contained in this Installation Sheet.
1 2 Attachment of footpad to metal base 1a. For hard floor placement Place speaker stand base(A) upside down on ground and paste rubber footpad on the 4 holes, as shown in fig.1.1 Attachment of speaker stand base to pillar •Insert pillar (B) from the bottom of speaker stand base and turn pillar to align to mounting hole, Secure them with M5x12(M-A)screw. Then tighten the screw ,but do not over tighten.
5 Mounting plate Attach mounting plate to the top of pillar with the appropriate combination of screw(M-B). Make sure mounting plate is level. Then tighten the screw ,but do not over tighten. as shown in fig. 4.1 and fig.4.2. Mounting speaker Remove the backing paper so the adhesive is exposed. Then place the adhesive pad on the mounting plate. Peel the other side of the backing paper on the mounting Self adhesive pad . Then place the speaker on the center of the mounting plate. as shown in fig.5.
