Wireless IR Remote Controller Extender MODEL :MIR-500 OWNERS MANUAL
LOCATION OF CONTROLS Transmitter Side Receiver Side DC Power DC Power IR Probe Transmitter and Receiver Front Infrared Remote Control Antenna Remote Control Indicators & IR Transmitter/Receiver Accessory DC 12 V AC 120V Adaptor x2 Infrared Extender X 3 1,1.
CAUTION: This equipment has been tested and found to comply with CE, FCC , Canadian DOC. regulations. These regulations are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with this manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular situation.
Product Description The MIR-500 Wireless Infrared Remote Control Extender enables you to extend the range of your present Infrared Remote Control so that you can operate VCRs, stereos, Cable Converter, Satellite receivers, etc., virtually anywhere in the home.
APPLICATION DIAGRAM 1. Stereo system with remote control: IR Signal RF Signal MIR-500 Receiver Wire to Extension Speaker Probe Stereo Wall IR Remote Control DIR-500 Transmitter 2.
Installation & Operation Guide Receiver Picture 1 Picture 2 Working with extender probe Power Adaptor Antenna (Using IR ) Make sure the IR probe is affixed toward IR sensor receiving Window with proper position (within 0.5M and working angles +/- 15°). Picture 3 Working without extender probe Keep Vertical Picture 4 Working without extender probe Side View 0.3 6.6 M 7M Working Angle not more than +/15° Not less than 0.
Transmitter Picture 6 Picture 5 Working Angle not more than +/- 15° Antenna Power Adaptor Keep Vertical Remote Control Picture 7 Antenna Distance Not less than 0.
Care and Maintenance Keep the MIR-500 Remote Extender dry. If it gets wet, wipe it dry immediately. Use and store the MIR-500 only in normal temperature environments. Extreme temperature can shorten the life of electronic devices Handle the MIR-500 gently and carefully. Dropping it can damage the circuit board and can cause it to work improperly. Keep the MIR-500 away from dust and dirt, which can cause premature wear of parts.
