INSTALLATION INSTRUCTIONS XBOX360 KINECT Sensor Wall Mounts Model: XBOX-01
NOTE: Please read Instruction Manual prior to installation. Component Checklist Please ensure you have received all parts listed on the component checklist prior to installing. If any parts are missing or faulty, contact your local distributor for replacement. WARNING • Do not begin installation until you have read and understood the instructions and warnings contained in this manual. If you need further assistance, please contact your local distributor.
1a WOOD WALL MOUNTING: 1b SOLID BRICK AND CONCRETE BLOCK MOUNTING: WARNING WARNING • Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. • Tighten screws firmly, but do not over tighten. Over tightening can damage the screws, greatly reducing their holding power. • Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware and components.
2 Installing The Base Platform After the wall plate has been safely secured to the wall. Insert the base platform into the wall plate as shown in fig.2.1. Insert the sensor base with attached XBOX360 KINECT Sensor into the base platform until you hear a “click” as shown in fig.3.2. fig. 2.1 3 Installing XBOX360 KINECT Sensor • Take the sensor base and line it up with the base of the XBOX360 KINECT Sensor.
