User Manual

35
6.2 Restore to Factory
This button is to reset all configurations to the default values. It means
the device will lose all the settings you have set.
Restore: Click this button to restore to default settings.
Factory Default Settings:
User Name: admin
Password: admin
IP Address: 192.168.0.254
Subnet Mask: 255.255.255.0
6.3 Backup/Restore
The device provides backup/restore settings, so you need set a
directory to keep these settings.
Backup: Click this button to back up the device’s configurations.
Browse: Click this button to browse the directory where you backup or
save the device’s settings.
Restore: Click this button to restore the device’s configurations.