4 Cameras & 4 Channel DVR Video Security System Bundle Chapter 1 Overview.................................................................................... 1 1.1 Introduction.................................................................................... 1 1.2 Packaging and Accessories .......................................................... 1 1.3 Main Features ............................................................................... 1 1.4 Technical Parameters..................................
4 Cameras & 4 Channel DVR Video Security System Bundle 4.11 Host Info .................................................................................... 33 Chapter 5 Client Software & Player ......................................................... 34 5.1 Client Software ............................................................................ 34 5.2 Video Player ................................................................................ 34 Appendix 1 Q&A...........................................
Cameras & 4 Channel DVR Video Security System Bundle Notes u The power for this DVR is provided by a DC12V/3A power adapter. Please check the power outlet before installation and ensure that it can meet the requirements of the adaptor; u Do not place the DVR in a location where it is subject to rain or moisture; u Do not install the DVR in a location where it is subject to violent vibration; u Do not install the DVR in a location where it is subjected to direct sunlight.
4 Cameras & 4 Channel DVR Video Security System Bundle Chapter 1 Overview 1.1 Introduction This product is an easy to use, do it yourself, 4/8-channel security system bundle. Included in the bundle is a DVR and four infrared (IR) capable day/night video cameras. The kit comes with everything you need to install and operate the security system (optional hard drive for DVR not included). The DVR uses the latest SOC technology and employs the H.
4 Cameras & 4 Channel DVR Video Security System Bundle 1.
4 Cameras & 4 Channel DVR Video Security System Bundle 1.5 Product Appearance and Interface Definition 1.5.1 Front panel 1.5.
4 Cameras & 4 Channel DVR Video Security System Bundle No.
4 Cameras & 4 Channel DVR Video Security System Bundle 1.7 Mouse This device supports a USB 1.1 mouse for system menu operations. Any USB mouse can be used, though one is included with the package.
4 Cameras & 4 Channel DVR Video Security System Bundle Chapter 2 Quick Installation 2.1 HDD Installation Hard disk installation should be performed by a technician to avoid damage to the equipment and hard disk. The DVR must be powered off before installation. This equipment supports a hard disk with the SATA hard disk interface. A Seagate brand hard disk is recommended. The installation procedure is as follows: A. Open the equipment and the hard disk bay can be seen. B.
4 Cameras & 4 Channel DVR Video Security System Bundle Equipment code: You can enter the equipment code "000000" (displayed on right side) into the "Device ID" input box. When using the mouse, the default code will be automatically input into the box for you. When operating multiple DVRs in the same location, you should change the equipment codes so that the remote control of one device does not activate the other devices. 2.
4 Cameras & 4 Channel DVR Video Security System Bundle 2.4.7 PTZ Control Right click the mouse in the main interface and select "PTZ control" from the pop-up menu, producing the following interface: The PTZ speed (fast or slow) can be controlled in this interface, as well as zoom, focus, and aperture control. Cruise setting: Step 1: Select the PTZ channel. Step 2: Set the pause time(s). Step 3: Adjust the arrow keys to the desired camera position. Step 4: Click "SET POINT".
4 Cameras & 4 Channel DVR Video Security System Bundle 2.4.10 PIP In the single-channel full-screen mode, you can see floating images of other channels. Chapter 3 Advanced Settings 3.1 Main Menu The main menu has the "PLAYBACK", "RECORD", "HDD", "BASIC", "ADVANCED" and "Exit" options, as shown below: Note: The settings on all the submenus below the Main Menu will not be active until "Enter" is selected. Any settings will be lost if the menu is exited without first saving the settings.
4 Cameras & 4 Channel DVR Video Security System Bundle 3.2 Recording Mode Enter the Recording Mode screen by selecting "RECORD" from the Main Menu: CHANNEL: used to select if the video recording function is enabled for the corresponding recording channel. REC MODE: select either startup recording or timer recording. When powered up: starts recording when the DVR is powered on (only if the corresponding channel is enabled in the "Channel" option). BY TIME: performs recording as scheduled.
4 Cameras & 4 Channel DVR Video Security System Bundle 3.3 Video Search Enter the Video Search screen from Main Menu→Video Search, as shown below. This unit supports 3 video search modes: A. Timing playback Time input: First select the corresponding channel and then adjust the date and time to be searched. Left-click or press "Enter" and the direction keys or enter digits directly for year, month, date, hour, and minute adjustment, and then click "Playback" to play back the record of this period of time.
4 Cameras & 4 Channel DVR Video Security System Bundle Notes: 1. 2. 3. 4. The detailed "FILE LIST" displays previously saved recordings. Each entry includes which channel the recording was made from, the data and time of the recording, the physical file size of the recording, and the type of recording (normal or alarm). Highlight the desired recording file in the list using the up and down cursor keys. When the desired recording is highlighted, press "Enter" to begin playback of that recording.
4 Cameras & 4 Channel DVR Video Security System Bundle 2. 3. recording file, the system will prompt the user with a "Not Enough Space" message. After the recording file has been backed up, remove the backup device. See Chapter 4 "DVR Network" for network backup procedures. 3.5 Hard Disk Management Enter the Hard disk Management screen from Main Menu→HDD, as shown below: STATUS: The DVR will automatically check for the proper operation of an installed hard disk drive.
4 Cameras & 4 Channel DVR Video Security System Bundle The Basic Setup screen includes the 6 options of Language, Date/Time, Password, Cameras, Video/Audio, and Exit. 3.6.1 System language Move the cursor to the "LANGUAGE" option (the icon is enlarged and highlighted to indicate selection) and press "Enter" to enter the language selection screen, as shown below: Select the desired language from the list, then click APPLY to save the setting.
4 Cameras & 4 Channel DVR Video Security System Bundle 3.6.3 User password DEVICE ID: EIf more than one DVR is being operated in the same area, each should have a unique Device ID. Enter digits directly to set the DVR ID number. PASSWORD: Press "Enter" and select "ENABLE" or "DISABLE" to set whether a password is needed for access or not. If this option is enabled, the user has to enter his/her password to log in successfully.
4 Cameras & 4 Channel DVR Video Security System Bundle positions. There are 5 setup options: top left, bottom left, top right, bottom right, and off. COLOR: Move the cursor to "Setup" of the corresponding channel and press "Enter" to enter the color setup screen, as shown below: Press "Enter" or drag the cursor directly to set the picture color, including the 4 options of chromaticity, brightness, contrast and saturation. Press "Enter" to exit and save the set parameters.
4 Cameras & 4 Channel DVR Video Security System Bundle 3.7 Advanced Enter the following screen from Main Menu→Advanced: The advanced functions include: Alarm, System Information, Motion Detection (MD), Mobile Phone Monitoring, System Maintenance, PTZ (pan, tilt, zoom) Setup, and Network Setup. 3.7.
4 Cameras & 4 Channel DVR Video Security System Bundle BUZZER: The time of the buzzer will ring once an alarm has been triggered. Options are: 0, 10, 20, 40, and 60 seconds. Post Alarm Recording: The length of time to wait before beginning recording after the motion detection alarm has been triggered. Options are: 30 seconds, 1 minute, 2 minutes, and 5 minutes. Email SETUP: The DVR can send an email whenever the motion detection alarm is triggered.
4 Cameras & 4 Channel DVR Video Security System Bundle You can see the software version number, whole unit version number, MAC address, and DVR serial number on this screen. 3.7.3 Motion detection Enter the Motion Detection screen from Main Menu→Advanced, as shown below: MD Channel and STATUS: Each channel has a corresponding switch to determine if the motion detection is active or not. Press "Enter" to select motion detection "On" or "Off".
4 Cameras & 4 Channel DVR Video Security System Bundle Configuration screen to set the times at which alarm recording will be possible (see timing recording in "Recording Mode" for the setup instructions). After the setup has been completed and motion detection is triggered, a red letter "M" will appear in the screen of the appropriate channel. See "Alarm processes" in Section 3.6.1 for alarm processing options. 3.7.
4 Cameras & 4 Channel DVR Video Security System Bundle then insert the disk into the USB 2.0 port on the back of the DVR. Click the "Enter" button to begin the system update process. The screen will display a progress box until the update is completed. The system power should not be interrupted during the update process. DEFAULT SETTING: Restores the system parameters to the factory default settings. RESTART: Restarts the DVR. 3.7.
4 Cameras & 4 Channel DVR Video Security System Bundle TYPE: Select the type of network setup in use: static configuration, DHCP, and PPPOE. Static: Allocates an IP address manually. DHCP: Automatically acquires an IP address from the DHCP server. Note: After selecting the DHCP mode and receiving confirmation of the change, restart the system. After startup, the DVR will establish a connection with the DHCP server automatically.
4 Cameras & 4 Channel DVR Video Security System Bundle automatically. DDNS Setup Click "DDNS Setup" to enter the following screen: DDNS: When a domain name resolution server is available, please select DDNS "ON"; SERVICE: Select one of three DDNS server options: 3322, dyndns, and perfecteyes. Host name: Enter the host name registered on the dynamic domain name server. User name: Enter the user name registered on the dynamic domain name server.
4 Cameras & 4 Channel DVR Video Security System Bundle 2) Activate account Log into your mailbox and open the confirmation link sent from support@dyndns.com, as shown below: Click the link below and enter the website to activate the account. 3) Login After successful activation, open the home page http://www.dyndns.com/ to log in.
4 Cameras & 4 Channel DVR Video Security System Bundle Enter the "Dynamic DNS Free" screen, as shown below. Click the "Get Started" button. Enter the hostname, select the service type, and then enter the dynamic IP address (usually being the dynamic IP address of the network of the DVR host) to be tied in the "Add New Hostname" screen, as shown below. Complete the application for the dynamic domain name as prompted.
4 Cameras & 4 Channel DVR Video Security System Bundle 26
4 Cameras & 4 Channel DVR Video Security System Bundle 3.9 Port Forwarding Port forwarding procedures: 1) Set the host IP address. See the relevant section. 2) Log into the router. Assuming the IP address of the router is 192.168.1.1, type this address into the IE address bar and press "Enter".
4 Cameras & 4 Channel DVR Video Security System Bundle As shown above, fill in the IP and the port number in the corresponding files, and select "Both" in the "Protocol" column. The check mark in the "Enable" column indicates that the entry is active. After setup, click "Save Setting" to save the settings. Note that 80 is the WEB port, 9000 is the media port, and 15961 is the mobile phone port. All these ports can be modified in the menu, please check the ports on the DVR.
4 Cameras & 4 Channel DVR Video Security System Bundle Chapter 4 DVR Network 4.1 Functional Characteristics The DVR supports LAN and WAN access, as well as IP and domain name access. 4.2 Installation and Download of Controls Automatic installation of plug-ins unit: First add the IP address of the DVR as a reliable site for your system. For example, if the IP address of the DVR is 192.168.1.100, first open IE Attributes→Internet Options →Security Options for an ordinary XP system, as shown below.
4 Cameras & 4 Channel DVR Video Security System Bundle name of the DVR is dvrtest05.eicp.net and its port is 80, enter the domain name in the IE address bar. Enter the user name and the password, select "LAN" or "INTERNET" depending on the network environment, and click "Login" to log into the client end or access the DVR end remotely. Note: If the DVR host is in a LAN, but you have chosen the "WAN" option, the preview image will be non-real-time. 4.
4 Cameras & 4 Channel DVR Video Security System Bundle 4.5 Recording Playback Click "PLAYBACK" to enter the Recording Playback screen, as shown below: First select the date of the recording to be played and the channel and recording types, then click "Search". The eligible recording files will appear in the file list, with the bold numbers denoting dates with recording data, as shown in the figure above. Select the file to be played back and double-click the filename or click "Playback" to play it.
4 Cameras & 4 Channel DVR Video Security System Bundle 4.7 Alarm Setup Click Setup→Alarm to enter the Alarm Setup screen, as shown below: The setup method is the same as the main DVR menu. See "Alarm Setup" in Chapter 3 for details. 4.8 PTZ Control Click Setup→PTZ to enter the PTZ Control mode, as shown below: See Chapter 3 "Network Setup" in this manual for setup instructions. . 4.
4 Cameras & 4 Channel DVR Video Security System Bundle See Chapter 3 "Network Setup" in this manual for the setup method. 4.10 System Setup Click Setup→Setting to enter the Setting screen, as shown below: INTERNET: Set the code stream. The higher the code stream is, the clearer the remote image will be, but the network bandwidth must be high to accommodate the extra data or the image may be delayed.
4 Cameras & 4 Channel DVR Video Security System Bundle Chapter 5 Client Software & Player 5.1 Client Software Insert the software disc into the drive on your PC. Double click the "Setup" icon to begin the software installation. Continue to install the software by following the instructions in the setup program. Once installed, a User Login dialog is displayed, as shown below: IP ADDRESS:Enter IP address or Domain Name. MEDIA PORT:Enter the port number (the default is 9000).
4 Cameras & 4 Channel DVR Video Security System Bundle Click "File" as shown in the following image. Select "Open Local File": Select the .264 file type, as shown in the following image: Select the file you want to play.
4 Cameras & 4 Channel DVR Video Security System Bundle Click the "PLAY" option, as shown in the following image: After clicking the "'PLAY" option, click the "up arrow" button in the player to enter the screen shown in the following image: 36
4 Cameras & 4 Channel DVR Video Security System Bundle ① Function Definition Function Icon Icon ① Recording Schedule All video Play Forward, Play backword Increase video Pause, STOP << Definition >> ST Start Operation Backward /forward frame File Cut Slow/Normal/Fast File Deletion Next Hour avi AVI Format transmission Capture bitmap OSD Decrease video Volume Control Note:1. Double click the image to enlarge it. 2. When converting the AVI format, you should click the ST button.
4 Cameras & 4 Channel DVR Video Security System Bundle Select the channel audio to be played then click "OK", as shown in the following image: 38
4 Cameras & 4 Channel DVR Video Security System Bundle Appendix 1 Q&A 1. I lost my password, how can I recover it? A: Please contact Monoprice technical support for assistance. To prevent this from happening, please use a password that is easy to remember and/or keep a copy of the password in a safe place. 2. I have no video output signal? A: Please confirm that the video output port is connected to the VIDEO OUT, and ensure the BNC connectors are in good connection.
4 Cameras & 4 Channel DVR Video Security System Bundle 13. 14. 15. 16. 17. 18. 19. A: Please test for the following reasons: u The RS485 cable A at B. u PTZ decoder setting, connection and installation is incorrect. u PTZ incorrect setup in the DVR. Motion detection does not work? A: Check the motion detection time and motion detection zone to make sure that they are properly configured. Check the sensitivity setting. The alarm does not work? A: Check the alarm setting and alarm connection.
4 Cameras & 4 Channel DVR Video Security System Bundle Appendix 2 Hard Disk Space Occupation Calculation This DVR stores data on the hard disk as shown in the following table. Unit of Measure: Megabytes/Channel/Hour Bit rate Excellent Good Ordinary D1 400 300 200 half-D1 350 250 150 CIF 300 200 100 Resolution This table is for reference only. Variations in the options and settings can cause more or less data to be used during recording. Actual results will vary from the above.
4 Cameras & 4 Channel DVR Video Security System Bundle ▲ Nothing contained in the manual attached to this product shall be duplicated, disseminated, transcribed or stored in any retrieval system or translated into any other language without written consent. ▲ The product specifications and information contained in this manual are for reference only, and the contents thereof are subject to updating without notice. ▲ We assume no responsible for any damage arising from the improper use of this product.