User's Manual

• 🛇: Touch the 🛇 button to quickly set the temperature to 0°C.

• ▬: Touch the ▬ button to reduce the target temperature by 1°C. Press and hold the

button to rapidly decrease the target temperature.

• ╋: Touch the ╋ button to increase the target temperature by 1°C. Press and hold

the button to rapidly increase the target temperature.

• OK: Touch the OK button to begin heating the Nozzle and/or Bed to the target

temperatures.

Jog Mode Screen

• <: Touch the < icon in the upper left corner to return to the Main Menu.

• 〈〈〈: Press the 〈〈〈 button to decrease the X, Y, or Z position by 10mm.

• 〈〈: Press the 〈〈 button to decrease the X or Y position by 5mm or the Z position by

1mm.

• 〈: Press the 〈 button to decrease the X or Y position by 1mm or the Z position by

0.1mm.

• 〉: Press the 〉 button to increase the X or Y position by 1mm or the Z position by

0.1mm.

• 〉〉: Press the 〉〉 button to increase the X or Y position by 5mm or the Z position by

1mm.

• 〉〉〉: Press the 〉〉〉 button to increase the X, Y, or Z position by 10mm.

• Return Home: Resets the X, Y, and Z axes to the Home position.