User's Manual

43
• Layer Start Position Y (mm): This option allows you to change the Y axis coordinates
of the position of the model layer.
Machine Tab
• Right Nozzle Diameter (mm): Sets the diameter of the nozzle on the right extruder.
This printer only has a single extruder, which is designated the right extruder. The
nozzle diameter of this printer is 0.4mm.
Line Width Tab
• Outer Wall Line Width (mm): This is the width of the outermost wall line. By
lowering this value, higher levels of detail can be printed.
• Inner Wall(s) Line Width (mm): This is the width of a single wall line for all walls
except the outermost wall.
• Top/Bottom Line Width (mm): This is the width of the top and bottom lines.
• Infill Line Width (mm): This is the width of a single infill line.
• Support Line Width (mm): This is the width of a single support structure line.
• Skirt/Brim Line Width (mm): This is the width of a single skirt or brim line.