User's Manual

Seam, because the filament continues to ooze at the start/stop location. The options on

this screen are used to mitigate this effect.

• Z Seam Type: Determines where the Z Seam will appear.

• Shortest: This option selects the most time efficient start/stop location.

• User Specified: This option allows you to specify the X and Y start/stop location,

which determines where the Z Seam will appear.

• Random: With this option, the printer will randomly choose the start/stop

location, which prevents building a column.

• Sharpest Corner: The start/stop location and the Z Seam will appear in the

sharpest corner of the model.

• Z Seam X (mm): This option is the X location of the Z Seam. This option can only be

set when the Z Seam Type is set to User Defined.

• Z Seam Y (mm): This option is the Y location of the Z Seam. This option can only be

set when the Z Seam Type is set to User Defined.

• Hiding Seam Preference: This option is only available when the Z Seam Type is set

to Sharpest Corner. It determines whether the Z Seam will be on the inside or

outside of the corner.

• Z Seam Relative: Checking this box will set the Z Seam in respect to the object's

center, whereas leaving the box unchecked will set the Z Seam along the absolute

position on the build plate. This option is only available when the Z Seam Type is set

to User Defined.