3-in-1 Magnetic Wireless Charging Stand P/N 43795 User's Manual
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. • This device is intended for indoor use only. • Do not expose this device to water or moisture of any kind. Do not place drinks or other containers with moisture on or near the device.
INTRODUCTION This 3-in-1 Magnetic Wireless Charging Stand allows you to simultaneously charge an iPhone® 12 or iPhone 13, an Apple Watch®, and a pair of AirPods®. It features a small footprint to save desk space and requires only a single USB power source. The Charging Stand uses the Qi® wireless charging standard. CUSTOMER SERVICE The Monoprice™ Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to none.
PRODUCT OVERVIEW ASSEMBLY AND OPERATION 1. Insert the T-Shaped Bracket into the base at an angle of 45°.
2. Slide the Wireless Charging Area onto the T-Shaped Bracket. 3. Insert the Apple Watch® charging pad into the circular opening, then insert the charging cable into the groove on the back of the T-Shaped Bracket. 4. Pass the USB Type-A connector on the Apple Watch through the hole.
5. Coil the Apple Watch® cable into a loop. 6. Insert the looped cable into the opening on the base. 7. Plug the USB Type-A connector on the Apple Watch cable into the USB port inside the base.
8. Slide the cover into place on the base. 9. Plug one end of the included USB Charging Cable into the USB Type-C® port on the rear of the base, then plug it into the included USB charger. For best results, the power source should have a variable output power of at least 5 VDC/3A or 9 VDC/2A or 12 VDC/1.5A. 10. You can now charge your iPhone® 12, iPhone 13, or another phone with a magnetic case and Qi® wireless charging by placing it on the Magnetic Wireless Charging Area.
LED INDICATIONS Condition LED Indication Standby Mode LED off Charging Complete LED off Power On Green LED for 3 seconds Charging in Progress Solid green Foreign object on charging area Flashing green COMPATIBLE DEVICES The following devices are known to be compatible with the 3-in-1 Magnetic Wireless Charging Stand. Other devices may be compatible. Newer devices from the named brands will most like be compatible.
TECHNICAL SUPPORT Monoprice™ is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. Technical support is available through the online chat button on our website www.monoprice.com or through email by sending a message to tech@monoprice.com.
REGULATORY COMPLIANCE Notice for FCC FCC ID: 2AUJH-Q820 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifying the equipment without Monoprice's authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices.
Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc. Apple®, Apple Watch®, AirPods®, and iPhone® are trademarks of Apple Inc., registered in the U.S. and other countries. Qi® and the Qi symbol are trademarks of the Wireless Power Consortium. USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum. Qualcomm® is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
