Owner's manual

Plug & Play Wireless Day and Night NetworkCamera

3.12. LED Display Control

The IP CAM provides an LED Display Control function, with which you can enable

or disable the LED indicators on the front panel of the IP CAM. The related settings

are explained below:

1. Normal LED display – select this option to enable the Status and Ethernet LED

displays.

2. Turn off LED display always – select this option to disable the Status and

Ethernet LED displays at all times.

3. Turn off LED display after network connected – when this option is selected

the LED will only display when the Internet connection has some problem. The

LED display will be off as long as a good Internet connection is maintained.

Figure 3-17: LED Control settings page