User Manual
17 
TROUBLESHOOTING 
1.  The login page does not appear after entering http://ap.setup in the web browser. 
  Ensure your computer is set to obtain an IP address automatically. 
  Verify that you entered the address correctly. Alternatively, try typing http://192.168.10.1 
in the web browser. 
  Use a different web browser and try again. 
  Reboot the router and try again. 
2.  I cannot access the Internet. 
  Connect a computer directly to the modem using an Ethernet cable to verify that you 
can access the Internet. If you cannot, contact your service provider. 
  Open a web browser and enter http://ap.setup or http://192.168.10.1 and run the quick 
setup again. 
  Reboot the router and try again. 
3.  How can I restore the router to the factory default settings? 
  While the router is powered on, press and hold the Reset/Pair Button on the router for 
6 seconds. 










