Specifications

9
ENGLISH
10
ENGLISH
Using The Cable Slider
For further cable management, Lil' Jamz
™
come with a Cable
Slider. The Cable Slider is designed to reduce tangles
during storage, as well as work in tandem with the Cable
Management Clip to eliminate sway and bounce while in use.
During use, push the slider about halfway between
the V where the cable split, and the in-ear headphone, then
adjust for your personal comfort. This will keep the cables
in a more compact position, reducing bounce and sway.
To use for the purpose of reducing tangles during storage,
push the Cable Slider all the way up to the in-ear headphones
before putting your Lil' Jamz away. Simply push the
Cable Slider back down when ready for use.
Using Lil' Jamz on Flights or At High Altitudes:
When using Lil' Jamz with a good seal while flying or at high altitude, the air pressure
will change, which will change the sound. The pressure inside your ears also will
change as you go up and down in altitude. To remedy this, occasionally break
the seal and re-insert your Lil' Jamz into your ears.
Cleaning the Eartips
IMPORTANT: DO NOT attempt to clean the eartips without first removing them
from your Lil' Jamz. Getting the delicate circuitry inside your Lil' Jamz wet may
cause permanent damage.
1. Firmly grip the eartip with one hand and the earphone with the other.
Carefully remove the eartip from the eartube.
2. Use warm water and mild soap on a damp cloth to remove dirt and earwax
from the eartip. DO NOT use harsh cleaning agents.
3. Rinse and completely dry your eartips before placing them back on your Lil' Jamz.
4. Carefully push the eartips back onto your Lil' Jamz, making sure they
are on the eartube completely.