Owner`s manual

ENGLISH

Mobile Jamz

™

Eartip Fit Testing

A good way to see whether or not the eartip is sealing in your ear canal is by

snapping your ngers next to your ear. If the seal is a good one, your ear will not

feel “plugged,” and the snapping of your ngers will sound dull and distant. If you

hear your nger snaps clearly, the seal can probably be better. If the sound of your

nger snapping is dull and distant, but your ear feels plugged up, like you’re on an

airplane preparing to land, then you’ve over-inserted the eartip.

Using The Cable Management Clip

1. Put Mobile Jamz

™

in-ear headphones into your ears,

as you usually would when listening.

2. Fasten the Cable Management Clip onto your shirt

around the chest or collar area or wherever is most

convenient for the shirt you’re wearing.

3. Grab the cable above the Cable Management

Clip and pull it slightly upward, sliding it through

the clip to create enough slack between the in-ear

headphones and clip to allow for head movement

and to take the stress o the in-ear headphones.

Using The Cable Slider

For further cable management, Mobile Jamz

™

come

with a Cable Slider. The Cable Slider is designed to reduce

tangles during storage, as well as work in tandem with the

Cable Management Clip to eliminate sway and bounce while

in use.

During use, push the slider about halfway between

the V where the cable split, and the in-ear headphone,

then adjust for your personal comfort. This will keep

the cables in a more compact position, reducing bounce

and sway.

To use for the purpose of reducing tangles during

storage, push the Cable Slider all the way up to the in-ear

headphones before putting your Mobile Jamz away. Simply

push the Cable Slider back down when ready for use.