Specifications

ENGLISH
9
ENGLISH
10
Proper Insertion and Removal of Eartips
IMPORTANT: Left and Right in-ear speakers: There are
Red and Blue colored bands and “L” and “R” markings
on each earpiece.
“L” with the Blue band is for the left ear.
“R” with the Red band is for the right ear.
1. You may wish to lightly moisten your eartips
for easier insertion.
2. Using your right hand, grasp the right in-ear speaker.
3. With your left hand, pull up and back on your right in-ear
speaker to straighten your ear canal.
4. Carefully insert your right in-ear speaker so that it seals
completely and comfortably in your ear. DO NOT insert
the speaker so deeply that your ear canal feels
completely “plugged.”
5. Repeat this procedure for your left ear.
6. When you’ve finished your listening session, remove your
in-ear speakers slowly with a twisting motion to gradually
break the seal.
Turbine Pro
™
Eartip Fit Testing
A good way to gauge whether or not the eartip is sealing properly in your ear canal
is by snapping your fingers right next to your ear. If the seal is proper, your ear will
not feel “plugged,” yet the snapping of your fingers will sound dull and distant. If you
hear your finger snaps distinctly, the seal is probably not adequate. If the sound
of your finger snapping is dull and distant, but your ear feels plugged up, like you’re
on an airplane preparing to land, then you’ve over-inserted the eartip.
Using Turbine Pros on Flights or At High Altitudes
When using Turbine Pros at different altitudes, the air pressure within your ears
may change, thereby changing the sound that you hear from the headphones. This
is especially true with the gains and drops in altitude during airplane travel. To help
with this, occasionally break the eartip seal and re-insert your Turbine Pros into your
ears. Another helpful tip is the common exercise of holding your nose and very gently
blowing through it, which can relieve some of the pressure in your ears.
Cleaning the Eartips
Keeping your Turbine Pro eartips clean is essential for safe, hygienic use.
IMPORTANT: DO NOT attempt to clean the eartips without first removing them
from the Turbine Pro. Getting the delicate circuitry inside your Turbine Pro wet
may cause permanent damage.
1. Firmly grip the eartip with one hand and the earphone with the other.
Carefully remove the eartip from the eartube.