Use and Care Manual

855-833-6483 OR EMAIL US AT [e-mail]855-833-6483 OR EMAIL US AT [e-mail]
PROBLEMS? DO NOT RETURN TO STORE! CALL US!
8
Operating Controls
Fuel Valve
Choke Lever
Engine Stop
The two way fuel valve is used to control the flow of fuel
from the gas tank to the carburetor. The valve is located
under the gas tank. Turning the fuel valve to the “ON” posi-
tion before starting the engine allows fuel to flow from the
tank to the carburetor. Turning the fuel valve to the “OFF”
position after shutting off the engine stops the flow of
fuel from the gas tank to the carburetor. Always keep the
fuel valve in the “OFF” position when you are not using the
mini bike.
The choke lever is used for starting the engine when it is
cold or when you live in a cold weather climate. It is located
above the air filter on the back of the engine. The choke
lever increases the amount of fuel in the air/fuel mixture
that is delivered to the engine. See the photo to the right.
“Start” - Choke Fully ON “Run” - Choke Fully OFF
The engine stop switch is used to turn off the engine.
When the switch is in the “OFF” position it will remove the
spark from the ignition system. To start and ride the mini
bike, push the small red button (top). This is the “RUN”
position. To shut off the engine, push the large red button
(bottom). This is the “OFF” position.
Throttle
The throttle controls the speed of the engine. To increase
engine speed, twist the throttle grip toward you. To re-
duce engine speed, twist the throttle grip away from you.
The throttle is spring loaded and will return to the closed
position (engine idle) when you remove your hand.