Use and Care Manual

855-833-6483 OR EMAIL US AT [e-mail]855-833-6483 OR EMAIL US AT [e-mail]
7
Attaching the Handlebars
Your Monster Moto MMB80 is shipped with
the handlebars NOT bolted on.
To attach the handlebars follow the steps below:
1. After unpacking your mini bike, place it on
the side stand on a flat level surface.
2. Unscrew the screws from the handlebar
clamps and set aside. Remove upper clamp.
3. While sitting on the bike, place the handle
bars in the lower clamp in a comfortable position,
being careful to center in the clamps.
4. Replace upper clamps and bolts and tighten to
18 foot lbs with the wrench provided.
Top View
Handlebar
Clamps
Tighten to
18 ft-lbs
Attaching the Number Plate
1. Locate the front number plate.
2. Mount the plate to the front of the bike with the
screws provided.
3. Tighten the screws until they snug the plate to the
mounting locations.