Use and Care Manual

855-833-6483 OR EMAIL US AT [e-mail]
PROBLEMS? DO NOT RETURN TO STORE! CALL US!
10
Operating Controls
Brake Mechanism
The MMK80 go-kart is equipped with a rear hydraulic disc
brake. It provides power to safely bring the go-kart to a
stop. It will also hold the go-kart at a stop if the engine is
running. Refer to the Basic Maintenance Procedures sec-
tion for brake adjustment instructions.
Pull Starter Cord
Air Filter
The air filter is used to keep dirt and large objects out
of the engine’s air supply. It is located at the rear of the
engine under the air filter cover. Examine the filter before
each ride to be sure it is not dirty and/or full of debris. You may
also use air filter oil (usually in spray cans) to keep the filter
flowing properly.
The pull starter cord is used to start the engine and has a
recoil mechanism to retract the cord after the engine has
been started. It is located on the right side of the engine,
directly behind the seat.
Spark Plug
The spark plug is used to produce the spark that fires the
engine. You should never touch the spark plug when the
engine is running or you will be shocked. Please refer to the
Basic Maintenance Procedures section of this manual for
detailed instructions on cleaning and replacing a spark
plug.