Full Product Manual

MTB02
Installation and User Manual
by Monster Mounts
Installation Steps
Remote Breakdown
[phone]
www.monstermounts.com
Monster Mounts/Promounts
20218 Hamilton Ave,
Torrance CA 90502
Warnings
- Do not use rough textured cleaning tools or highly corrosive cleaners
when cleaning your LED Lights. These tools and chemicals will damage
the product. ONLY use a soft damp cloth and non corrosive cleaners.
- Do not scratch the LED strips or use sharp objects on them.
- Do not permanently bend, twist, or screw through the LED strips as
this will damage the LED’s internal components.
- Do Not pull or snap with excessive force, this will damage the
product.
- If the product is damaged or wires are frayed or damaged, do not use
the product. If your product arrived in this condition, contact us for a
replacement.
- Recommended temperature is between 10°F to 120°F. Do not use in
extreme heat or cold.
- Once the product has come to the end of its life please recycle the
components. Ask your local retailer for proper disposal methods.
Packaging Contains
- 1 Piece 50cm USB cable
- 1 piece IR receiver with signal cord 50cm, 2 connect cord 10cm &
125cm
- 1 piece 24 key remote controller
- 2 piece 50cm strip light, 30 LED/piece, 5v, IP65 waterproof 5050 RGB
LED strips
- 1 - - 2 -
1. Clean the surface of residue and dust
2. Remove the protective lm covering the adhesive backing on your
LED Strips
3. Place the LED strips in the location you desire, pressing rmly and
sliding your nger along the strip to ensure a secure attachment.
4. Connect the USB plug to any USB port, such as the one located on the
back of your TV or outlet. If no USB power port is available, a USB to
outlet adapter can be used.
*USB to OUTLET Adapter Not Included
- 3 -
- 4 -
5. Use the included IR Remote Control to choose your favorite color
and settings.
*IR Remote Control must be pointed at the IR Receiver to work and
change color settings on your lights. (IR Receiver located near the lights USB connector).
6. Enjoy your new LEDs!
LED Strip Specification
- LED Type: SMD 5050
- PCB Color: Black
- LED Color: RGB
- LED Quantity: 30 LEDs per 50cm Strip
- Voltage: DC 5V
- Waterproof Class: IP65 Waterproof
- Self-adhesive Back with Double-sided Adhesive Tape
- LED Strip: 2 Piece 50cm Length
Controller Specifications
- Working Temperature: 10°F - 120°F
- Voltage Supply: DC5V
- Output: 3 Channels
- Connecting Mode: Common Anode
- External Dimension: L 49.5 mm x W 34.5mm x H 22mm
- Net Weight: 50g
- Function Model: 20 Models
- Static Power Consumption: <1 W
- Output Current <2 A
- Output Power: 5 V <30W
- Connecting: 2 pieces 5V 5050 RGB LED Strips
- Cable Length:
- USB/DC Cable Length: 50cm
- IR Receiver with signal cord, 2 Connection Cord: 10cm and 125cm
- 5 - - 6-
Key Function
ON/OFF Turns the LED Lights On or OF
Speed/Brightness Increase or Decrease the Brightness of the LEDs
when on a static color
Increase or Decrease the changing Speed of the
LEDs when in a dynamic theme mode
Static Color Options 16 color keys each corresponding to a single
static color. Select a color by pressing its colored
button.
Flash Dynamic Theme mode that jumps between
three colors: red, green, and blue.
Strobe Dynamic Theme mode that creates a strobe-light
eect
Fade Dynamic Theme mode that fades between 7
colors
Smooth Dynamic theme mode that ashes between 7
colors