User guide
10
English
Switch Off
To switch off, press and hold the multifunction key for about three seconds.
The headset beeps descending tones, and the red indicator light is briey
displayed. If the headset is not connected to a device within 10 minutes, it
switches off automatically.
Pairing
1. Ensure that your phone or music player is switched on.
2. To pair the headset if it has not been previously paired with a device, switch
on the headset. The headset enters the pairing mode, and the blue and
red indicator light starts to ash quickly. To pair the headset if it has been
previously paired with another device, ensure that the headset is switched
off, and press and hold the multifunction key (for about ve seconds) until
the blue and red indicator light starts to ash quickly.
3. Activate the Bluetooth® feature on your phone or music player, and set it to
search for Bluetooth devices.
4. Select ”Beats Wireless” from the list of found devices on your phone or music
player.
5. If necessary, enter passcode 0000 to pair and connect the headset to your
device.