Bluetooth Speaker KATANA Instruction Manual
Safety Instructions 1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions – The safety and operating instructions should be retained for future reference. 3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions – All operating and use instructions should be followed. 5.
FCC Statemen (FCC ID:RJE-173099) 1. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
P.
1. Remote sensor 2. Power button 3. Source/Pairing button 4. Source LED indicator 5. Volume up button 6. Volume down button 7. Light bar 8. StreamCast slot 9. AUX jack 10. Optical fiber jack 11. USB charge port 12. LED on/off button 13. Previous button 14. Bluetooth switch button 15. Optical in switch button 16. Mute button 17. Play/Pause button 18. Next button 19. AUX switch button 20.
Remote control batteries 1. Slide the battery cover in the direction of the arrow. 2. Fit the batteries observing polarity as shown with the type R03/AAA specified. General Operation Powering your player ON/OFF To power the player ON: 1. Plug AC cord into AC jack, and the other end plug into a live AC wall outlet. 2. Press the Power button on the top panel or the remote control to switch the player to ON mode. To power the player OFF: 1.
1. Press and hold the Source/Pairing button on the top panel for 3 seconds to start pairing operation, the source LED will blink in blue and red alternately. 2. Activate Bluetooth on your device according to the device’s user manual to link to the player. Typically, Bluetooth controls are found on the device’s tools or settings menu. Turn on Bluetooth connectivity and make you device “discoverable”. 3. Search the device name “KATANA” on your Bluetooth device listed and select it as your audio speaker. 4.
By Optical Fiber jack 1. Press the Source/Pairing button on the top panel or Optical in switch button on the remote control to select the optical in mode. Red LED will illuminate. 2. Remove the dustproof stopple from Optical Fiber jack. 3. Connect a sound sources with a optical fiber cable to play through your player as below hookup diagram shown. 4. Set your personal audio player/computer to PLAY.
Charging your device with USB port The USB port on the rear of the unit provides a 5V 2.1Apower output via a USB type ‘A’. Note: The USB can only provide a maximum power of 5V 2.1A, do not exceed this voltage or current as it may cause damage to your unit or device. Troubleshooting There is no power to the unit Ensure that the Power Switch of wall socket is physically set to the ON position. Ensure that the AC plug is securely connected to the player and proper wall outlet.