User's Manual

Manuel Utilisation.indd 25
16/10/2014 17:58
EN
P AIRING
1. Ensure that your phone or music player is switched on.
2. To pair the headset if it has not been previously paired with a device, switch on the headset and hold the button
down for about 3 seconds. The headset enters the pairing mode, and the blue and red indicator light starts to flash
quickly. The headset is ready to pair with your device.
3. To pair the headset if it has been previously paired with another device, ensure that the headset is switched off ,
and press and hold the multifunction key (for about five seconds) until the blue and red indicator light starts to flash
quickly .
4. Activate the Bluetooth® feature on your phone or music player, and set it to search for Bluetooth® devices.
5. Select “ CHANEL ” from the list of found devices on your phone or music player.
6. If necessary, enter passcode 0000 to pair and connect the headset to your device
USB AUDIO
If you are using your PC as a power source for charging through the USB cable, you can listen to your headphones at
the same time. When charging from a laptop or desktop, audio is automatically routed through the USB cable.
(Your Mac or PC may require configuration) Bluetooth® wireless communication will be disabled while charging on a
laptop or a desktop. When using USB Audio, the headphone microphone is not supported.
By-Pass Switch: the By-Pass switch controls the power to both Bluetooth® wireless technology and ANC .
By-Pass Switch Off: Bluetooth® and ANC are available.
By-Pass Switch On: Bluetooth® and ANC are not available.
25