Specifications

6
TURNING THE MICRO ON
Note: The Micro comes with a lithium-ion battery
that is approximately 30% charged. For best
results, fully charge the Micro before use.
Power Switch
The Power Switch is located on the back of the
Micro. Slide the switch to the ON position to turn
on the Micro.
When the Micro is turned on, it automatically
defaults to voice recognition mode and
searches for the last Bluetooth
®
device to which
it was paired.
MULTIFUNCTION BUTTON
Use the Multifunction button to enable voice
control, set up Bluetooth pairing, play/pause
music, and other functions. The Multifunction
button will execute dierent commands
depending what mode it is in and how long
you hold the button down.
Short Press—Press and release
Double Press—Press twice and release
Long Press—Press and hold down for
three (3) seconds and release
VOICE COMMANDS
The voice control system understands
approximately 25 predetermined commands.
Commands must be given exactly as they appear
on pages 10–12, word for word.
Follow these steps to activate voice commands:
1. Slide the switch to the ON position to turn
on the Micro.
2. By default, the Micro is not in voice
command mode when you turn it on.
Press and hold Volume Up and Volume
Down buttons simultaneously to enable
voice command features.
3. After the Micro connects to your device,
Micro will say, “Your device is connected”.
4. Say the trigger words, “Hello Monster Micro”.
5. The Micro will respond with the prompt
“Say a command”.
6. For a reminder list of commands, respond with,
“What can I say?”
Operation