Specifications

Operation (continued)

CHARGING

Monster Micro comes with a lithium-ion battery.

For best results, fully charge the Micro before use.

To charge, connect the USB micro cable to the

power adapter. Four sets of plug prongs are

included for worldwide use. Connect appropriate

prongs to adapter and connect to USB cable

Monster

Micro.

To install plug prongs, slide the appropriate

prongs over the adapter until it clicks in the

locked position. To remove plug prongs, press the

tab in the center of the plug prongs and slide up.

Charging Indicator Lights

t Battery Low—Solid Red

t Battery Very Low—Flashing Red

t Battery Charging—Flashing Blue

t Fully Charged—LED O (Power OFF),

Solid Blue (Power ON)

Caution

Battery is not user replaceable. Danger of explosion

if battery is incorrectly replaced. Batteries must be

recycled or disposed of properly.

REPLACING FRONT

AND BACK GRILLES

A selection of replacement grilles is available at

MonsterProducts.com/products/clarityhdmicro

Both front and back grilles are attached to the

Micro with magnets. To remove grille, pull up from

one end and the grille will detach. Set replacement

grille on to the Micro and the magnets will pull it

into place.

1 2

Install Plug Prongs:

Remove Plug Prongs: