USER GUIDE & WARRANTY GUIDE ET GARANTIE D’UTILISATEUR GUÍA DEL USUARIO Y GARANTÍA Small SuperThin Flat Mount ™ Petit SuperThin À plat S’élever ™ Pequeño SuperThin Llanada Montar ™
A NOTE FROM THE HEAD MONSTER THANK YOU for purchasing a Monster SuperThin™ Flat Mount. This mount reflects our passion for creating the most innovative and practical AV solutions on the market to enhance your viewing experience. Monster SuperThin Flat Mounts deliver the clean, sophisticated look you want, with an ultra-low profile that allows a clean, stylish installation, along with solid, safe construction. Start enjoying TV on your terms—when, where and how you want to watch.
More Great Products from Monster FlatScreen™ Get the Look You Want and the Performance You Need. Monster FlatScreen CleanView™ Cable Manager Conceal unruly cords and cables for a clean, sleek look. Easy to install with paintable covers to match any décor. Monster FlatScreen Cables™ Monster Flatscreen Cables are compact and flexible for easy routing and installation. Exclusive Monster patented technologies deliver the advanced performance you need from your flatscreen TV.
Specifications and Notes: Required Tools MM MM MM MM MM MM MM Wall Stud Mounting: • • • • • • Electronic stud sensor Level Electric hand drill 3/16" drill bit Phillips screwdriver Combination wrenches or socket set Masonry Mounting (brick, concrete, concrete blocks): • Above tools • Replace 3/16" drill bit with 1/2" masonry drill bit ,OCKING 3CREW MM MM MM VESA™ 75x75/100x100 Compliant Monst
Package Contents Important: Read Before Installing: Warning: 1 LCD Mounting Plate (VESA 75/100-Compliant) DO NOT install on a sloping surface. Install exclusively on a vertical surface. DO NOT mount to cabinetry made of particleboard. DO NOT install in a room with excessively high temperatures or high humidity. Install at least 3 ft. from all water sources. 1 Wall Mounting Plate DO NOT install near an air conditioner. DO NOT install in a location where there is excessive dust, smoke or moisture.
Caution: To prevent eye fatigue, do not install where there is direct sunlight or excessive light. When carrying out maintenance, disconnect the TV’s power supply to avoid electrical shock. If planning to route AV cable in wall, only use cable UL-certified for this use.
Installing the Wall Mounting Plate Remove all pieces of the wall mounting system to ensure you have all necessary parts. Wood Stud Mounting: 1) Using an electronic stud sensor, locate a wall stud at your desired mounting location. LEVEL CHECK Flatscreen Wall Plate Wood Stud 2) With the help of a friend, position the wall mounting plate on the wall stud. ,%6%, 3) #(%#+ Suspend a straight edge, such as a ruler, across the top of the mounting plate.
Installing the Wall Plate continued Masonry Mounting Masonry mounting requires specialized knowledge, skills and tools. Monster highly recommends that you seek the help of a professional installer when mounting to masonry. DO NOT drill holes in masonry mortar joints. Flatscreen Wall Plate Masonry Wall 1) With the help of a friend, position the mounting plate in the desired location. ,%6%, 2) #(%#+ Suspend a straight edge, such as a ruler, across the top of the mounting plate.
Attaching Your Flatscreen TV to the TV Mounting Plate Flatscreen Mounting Plate Small Screws Do not lay your TV face down when attaching the TV mounting plate. This can cause permanent damage to your screen. Lean it against a wall or other solid surface so it remains vertically upright. The television should be unplugged before threading any bolt or screw into the back panel. Your mounting system features two sets of screws, M4x15 and M5x15. The M5x15 is the thicker of the two.
Hanging Your Flatscreen TV on the Wall Plate 1) Connect the TV’s power cord and any AV cables to the TV before hanging it. With the help of a friend, lift the TV and plug the TV’s power cord into a nearby AC outlet. If routing AV cable in wall, run it through the prepared opening in your wall. 2) Lift your TV up to mount level. Raise the TV just above the wall mounting plate. Slide the TV and mounting plate downward onto the wall mounting plate.
LIMITED WARRANTY FOR CONSUMERS Monster, LLC., 7251 West Lake Mead Blvd., Las Vegas, NV 89128, USA, (415) 840-2000 (“Monster”) extends You this Limited Warranty. Statutory or common law may provide You with additional rights or remedies, which shall not be affected by this Limited Warranty.
SPECIFICATIONS TABLE Product Model Warranty Period for Product Small SuperThin™ Flat Mount Lifetime ”Lifetime” means the lifetime of the original individual purchaser of the Product, or for as long as the original individual purchaser owns the Product, whichever is less in time. FORMAL WARRANTY CLAIM How To Make A Claim.
MonsterCable.com/FlatScreen © 2009 Monster, LLC 7251 West Lake Mead Blvd., Las Vegas, NV 89128 Monster Technology International Limited Ballymaley Business Park Gort Road Ennis, Co. Clare, Ireland Engineered in the USA and manufactured for Monster to its quality specifications. Made in China. Créé aux États-Unis et fabriqué pour Monster selon ses spécifications de qualité. Fabriqué en Chine. Diseñado en los Estados Unidos y fabricado para Monster de acuerdo a sus especificaciones de calidad. Hecho en China.
